The Siltec Durabond hot melt structural waterproofing system is designed to last the lifetime of the structure to which it is applied. Durabond is a hot melt applied reinforced bituminous system, comprising of polymer modified bitumen, blended with synthetic rubber compounds, finished with a heavy duty protection membrane. It is designed for use primarily as an inverted roofing system.
Durabond
Durabond is available in two formats:
Durabond Plus
This system comprised of two coats of modified rubberised bitumen compound with a polyester reinforcement fleece between coats.
Durabond Rapid
This hot melt variant offers a faster installation process and reduction of time required on site. It is applied using a single coat of the rubberised hot melt compound, bedded in to a reinforcement mesh.
Both formats are finished with a Durabond surface protection sheet. Durabond delivers a tough, flexible, monolithic waterproofing solution.
Protection sheets:
Durabond N4
A polymer modified bitumen membrane with a spun bound polyester core reinforcement. Used as the standard access protection sheet.
Durabond N4 Anti root
A polymer modified bitumen membrane, blended with root preventatives to FLL standards, with a spun bound polyester core reinforcement. Used in green roof applications.
Detailing:
Iter Forte 15A / Iter Forte 17A
A torch applied polymer modified bitumen membrane. The upper surface is finished with sand, for use as a base layer or non exposed protected situations.
Iter Forte 17A Mineral (Dark Grey)
A torch applied polymer modified bitumen membrane with polyester reinforcement. The upper surface is finished with mineral granules, to provide UV protection in exposed situations.
Iter Antiroot Mineral (Dark Grey)
A torch applied polymer modified bitumen membrane, blended with root preventatives to FLL standard, with a spun bound polyester core reinforcement. The upper surface is finished with mineral granules, to provide UV protection in exposed situations.
Key features:
- Can be laid to zero falls
- Seamless, flexible, self-healing monolithic barrier
- Can be applied in temperatures down to -20°C
- Ability to withstand heavy loads and weights
- Extremely Low life cycle costs
- No risks of water tracking beneath system
- Site friendly – work can be easily phased and detailing can be applied first if necessary
- Rot proof – perfect for hard landscaping or green roof finishes
- Extensive warranties available
- Eco friendly
